Autel Maxisys Pro MS908P diagnostic scanner does a purge and seal test on 2009 GMC Yukon hybrid successfully.

Pictures attached:

I have a question about Yanhua Mini ACDP + module 4 BMW 35080 read and write: Can the 35080 adapter be used with puncture socket so don’t need to remove eeprom?

OBD2TOOL engineer answers:

The BMW 35080 adapter has to be dismantled to read and write with Yanhua Mini ACDP, instead of using with Puncture socket.

Please desolder the chip like the following image shows:

Comparing v2017 Super DSP3 mileage programmer, the newest V2019 Super DSP III adds newer vehicles, including Audi/VW/Skoda/SEAT MQB platform and Benz/Land Rover/Jaguar/Volvo/Porsche 2010-2017 models.

2019 Super DSP3+ Odometer Correction Car List:

*Attention:

The above new updates are for car models with platform mqbab-(continental/vdo) from 6/2014.

DSP3+ (model supported by DSPIII) fully supports Audi/VW/Skoda/SEAT/Bentley/Benz/Land Rover/Jaguar/Volvo/Porsche 2010-2017 models, as follows:

VAG MQB Platform odometer reset vehicle list:

vw/golf sportsvan 06.2014- nec35xx diag    by obd2

vw/golf mk7 06.2014- nec35xx diag    by obd2

vw/passat b8 06.2014- nec35xx diag     by obd2

vw/polo 06.2014- nec35xx diag    by obd2

vw/tiguan 06.2014- nec35xx diag by obd2

vw/touran 06.2014- nec35xx diag by obd2

audi/a3 06.2014- nec35xx diag     by obd2

audi/q2 06.2014- nec35xx diag     by obd2

skoda/fabia 06.2014- nec35xx diag by obd2

skoda/rapid 06.2014- nec35xx diag      by obd2

skoda/octavia 06.2014- nec35xx diag    by obd2

skoda/superb 06.2014- nec35xx diag    by obd2

seat/ibiza 06.2014- nec35xx diag   by obd2

seat/toledo 06.2014- nec35xx diag by obd2

seat/leon 06.2014- nec35xx diag   by obd2

*attention:the above new updates are for car models with platform mqbab-(continental/vdo) from 6/2014

A quick demonstration of Lonsdor K518ISE programming key for 2005 Ford Focus in two minutes. And for more auto key programming,check hereautomotive key programming cases.

This is the Ford with this key the HP 100 101, sorry not the Tibbe key.

It’s very simple to use Lonsdor K518ISE.

You see there is a range of other things but we’re just doing this key today.

So just show you the original key is this one and when you put that in the ignition, turn the ignition on and this light here that’s currently, flashing will go solid and then go out that shows that the system’s working.

The new key is this one, it’s been cut ready, switch the ignition on and you see that light goes just flash basically, so it’s not programmed yet.

So, go to “Immobilizer“.

There is a nice search function at the right corner of the machine.

Type F and choose “Ford”, then “China”.

Yes, it does say China, but I’ve tested it quite a few times there’s name of Europe, South America, and anything else, it’s just China here, but it does work under that, so we are gonna go for China.

We will see that years the classic focus’s, tap “Type 2”, then “Immobilizer”.

Tap “Add key”, then get message “Downloading application”.

Read message ” Connect device (Lonsdor K518) OBD test cable with the vehicle OBD port, switch ignition one.”, tap “OK”.

Please insert the new key to be programmed. Note: It needs two right keys to start vehicle.

So we are in a certain new key to be programmed which is this new one here, so press “OK”.

Identified number of programmed keys in car:2, select “OK”.

Programming, please wait…

Programming complete, successfully programmed key count (2).

So I’m going to test out because that should have jumped up to free rarely.

Just ignition on, insert back to see if the light goes solid and goes out.

So that’s goes solid and goes out, the key is programmed.

And going to check another one, insert into the ignition and to see if the light goes solid and goes out, then the key is programmed successfully.

So they both work. So when it says keys programmed to it must have meant the new key count will be too, so there must have just been just this one key programmed at the time and the other key is gonna be this one the new one. To me that should say free, but it works, the both start the car. So we’re gonna do is pop the key in just test it turn the ignition on, might go solid and goes out, means it’s gonna work it’s a neutral, start the car.

So Lonsdor K518 programmer takes literally less than two minutes to program the key.

Lonsdor released the Lonsdor K518ISE Key Programmer update announcement on 14-03-2019, saying it can work with more SCION vehicles.

How to update SCION for Auto Key Programmer Lonsdor K518ISE:

Close the device and open it, the update will come to you. All will be successfully

Lonsdor K518ise SCION car list:

SCION \CH-R\2018\ Smart key

SCION \CH-R\2018\Mechanical key

SCION \2013-2016\ Smart key

SCION \FR-S\2013-2016\Mechanical key

SCION \iA2016-2018\ Smart key

SCION \iM\2017-2018\Mechanical key

SCION \iQ\2012-2015\Mechanlcal key

SCION \tC\2005-2010\Mechanical key

SCION \tC\2011-2015\ Smart key

SCION \tC\2011-2015\Mechanical key

SCION \xB\2012-2013\Mechanical key

SCION \xB\2012\Remote

SCION \xD\2012-2013\Mechanical key

More Lonsdor update info released on 14-03-2019:

Software Update/Optimization Highlights

VAG IMMO K-Line 2&3 PIN code reading capability
BMW CAS1 Available as of now
BMW FEM/BDC latest variant indexes added as listed below
KIA/HYUNDAI Type 46 PIN code read for both Smart + Key-blade transponder types + implementation of LKE Emulator to enable PIN reading in case of AKL
Toyota selection menu by vehicle model
Porsche previously unsupported models AKL added via LKE Emulator

in detail..

Lonsdor k518ise Software Optimization:

1.VWIMM02&IMM03 [Read PIN)

2.VW IMM04 Enable more dashboards to auto identify immo type

3.Skoda IMM02 ft IMM03 (Read PIN}

4.Skoda IMM04 Enable more dashboards to auto identify immo type

5.BMW CAS CAS1 is available; CAS2/CAS3 [Delete key)

6.BMW FEM/BOC Suport swfl 00002419 071 010 040.swfl 00002419 080 010 010

software version

7.Toyota: Optimize menu [Select from vehicle)

6.Oodge/Chrytler/JEEP ft Honda.

9 Hyundoi/Kle Optimize [Read 46 chip PIN) and [Read PIN code{46 smart

card)), support obtaining PIN via LKE decoding

10.BVD [General working key) .support generating SK via LKE to obtain PIN.

11.Porsche Optimize key programming procedure For Boxter(2005 2011)/Coy-

man(200S 2011)/997(2005-2010)/911(200S 2010).support bypass programming

with LKE

LKE Emulator Main Function

1.Features of Toyota/Lexus smart key all lost(5 emulators-in-1)

No need networking

Localized computing

2.Generate chip

LKE can be used to work as an emergency key to program when no dedicated

chip.

3-Copy chip

By collecting data to decode and copy chip, LKE currently supports some 46 and 4D chtp copy

4.Simulate and convert chip

Use [Generate chip] to make various chips, part of 40/46 and SKE Toyota  currently supported

5.Decode chip

Decode 46 and 4D chips to obtain SK.

6.identify ignition coil and key chip type(al) key lost)

7.As K518 helper:

Achieve programming key without PIN for Hyundai and Kia.

Achieve programming key without PIN for BYD

Achieve programming key without PIN for Porsche Cayman(2005-2010) and boxster